GTI Spindle Technology provides its clients incomparable machine tool spindle repairs on all types of Matsuura grinding machines. They have in house resources and experienced sales staff to offer you effective and cost benefit solutions. Most importantly, we have full access to parts as well as complete manufacturing capabilities that allows us to repair your machine tool spindle properly the very first time.

GTI is the spindle company for your MATSUURA sales, service and repair requirements

Looking for Help?

For all your spindle solutions; call us on our Toll Free Number: 888.473.9675 or write to us at info@gtispindle.com.

Matsuura Spindle Re-manufacturing Services

• AnalysisOur technicians thoroughly inspect the spindle to identify the problem correctly before moving ahead with any spindle repair work. All spindles are subjected to the following 5 point assessment:
  • Incoming Vibration Aanalysis Incoming vibration analysis is performed in order to determine: bearing condition, level
    of unbalance, non-repetitive runout.
  • Assembled Spindle Inspection Pilot ID or taper runout on tool end of shaft to determine possible spindle crash or
    improper tooling.
    Rear taper runout inspection to determine possible over tightening of belts or improper
    tooling.
    Preload test to determine bearing wear or spindle crash.
  • Disassembled Spindle Inspection Pilot ID or taper inspection to determine spindle crash, improper tooling or overheating.
    Bearing journal inspection to determine improper bearing fits or use of spindle after
    initial failure.
    Overall shaft condition to determine crash, overheating, lack of coolant or overloading.
  • Bearing Condition An inspection of bearings is performed under lab conditions by factory trained bearing
    specialists to determine lack of lubrication, over speeding, spindle crash, overloading,
    loss of preload, contamination (coolant or other material) or overheating due to
    electrical problems.
    In addition, we have the access to all Bearing OEM’s facilitation and personnel.
  • Engineering Recommendations We recommend spindle design changes or enhancements to improve spindle longevity
    and/or performance. For example, if a spindle has failed due to contamination, a design
    change such as new labyrinth nuts, air purging, hybrid bearings or improved sealing
    design will be recommended and implemented.
• Removal The spindle needs to be removed from the grinding machine. Removal can be done either by the customer themselves or by GTI technicians who can be sent to the client’s site for removal of the spindle.
• Repair Post planning of Matsuura spindle repair corrective actions, rebuilding as well as preventative maintenance work advice is given which needs to be taken care of before installing the spindle back into the machine.
• Testing The spindles are tested to check if all the machine interface parts such as encoders, proximity switches etc. are functioning properly and all spindles have to pass the vibration analysis and review of an autonomous GTI QC manager.
• Reinstallation Matsuura machine tool spindle post repair are reinstalled and checked for performance and reliability; which can be executed upon customer request by a GTI technician. Detailed documentation of the repair work is provided to all GTI customers.

Matsuura Spindle Repair Services

• Ultra High Speed Vertical Linear Motor Machines | Models: LX-0, LX-0 5AX, LX-1, LX-1500
• Horizontal Machining Centers | H.Plus Series includes: H.Plus-300, (new) H.Plus-405, H.Plus-500, H.Plus-630, and H.Plus800
• 5-Axis Multi-Tasking Machining Centers | CUBLEX-Series includes: CUBLEX-25 and CUBLEX
• 5-Axis Vertical Machining Centers | Models: MAM72-25V, MAM72-3VS, MAM72-3VM, MAM72-35V, MAM72-42V, and its (new) MAM72-63V multi pallet machine tool.
• High Speed Vertical Machining Centers | FX-2 model with high-tech 38,000 min-1 and Spindle Thermal Displacement Compensation & Scale Feedback System.
• High Accuracy Vertical Machining Centers | Mold.Plus-800 model complete with Matsuura´s renowned Thermal Growth Compensation System.
• Vertical Machining Centers | V.Plus Series includes: V.Plus-500, V.Plus 660, V.Plus 800, V.Plus 1000, and the (new) V.Plus-1500 and V.Plus-2000; R.Plus Series includes: R.Plus-550 and R.Plus-800.

Call GTI now, dial  888.473.9675 to get a  quote free for you, on your future Matsuura machine tool spindle for repairs service.

There is a One year repair warranty for any manufactured spindles and also for remanufactured spindles. If you have any questions regarding spindle repair, please dial 888.473.9675 or send email: info@gtispindle.com And enquire about our cost reduction program under guarantee!